Door Lock Replacement - What Are the Different Parts of a Door Lock?
Faulty door locks can make your home an easy to target for burglars. The change of your lock is an inexpensive method to improve security without making your doors inaccessible.
A lot of locks come with a cardboard template that you can wrap around the edge of your door to make sure it is properly fitted. This will ensure that you don't buy the wrong lock.
The Cylinder
The cylinder is the primary element of a door's mechanical lock. It houses a collection of spring-loaded pins that ensure that the door is locked when there is no key put into the hole. When the key is inserted the knob's uneven edge the knob pushes the pins of the cylinder into their proper place. When the pins are in place into the cylinder, they allow the bolt, also known as the latch, to move forward and connect the inside of your door.
The bolt extends from the cylinder, and into the box, through a hole is made in the door frame. The box is designed so that the bolt isn't able to be easily removed. The bolt is retracted by a clip spring once the door is closed. When you turn the handle, the spindle inside the cylinder spins. After it has completed its rotation the slanted side of the bolt is retracted into the door frame. The bolt rests on the carved out portion of the doorframe, and keeps the door closed until you have to open it.
A faceplate is an interior metal plate that is attached to your door on either side of the hole that is used for the deadbolt. Its purpose is to shield the locking mechanism from damage caused by your knob's continual inserting and removal. Installing a new lock? Make sure that the faceplate is aligned to the hole on the door frame. Also, make sure the faceplate is securely attached both to the plate and the bore of the latch.
If you're replacing a door lock be sure that the deadbolt is fitted correctly by sliding it into the strike plate's opening hole. After you're done then screw the strike plate and core of the lock back into the hole. Do not tighten too much as this can damage the latch or prevent it from fitting into its groove. You can test the new lock by turning the key with the lock in the locked position. If you find any issues, like a loose latch or a loud deadbolt, it's time to replace the old lock with a brand new lock.
The Faceplate
A faceplate is an oversized flat plate that attaches to the headstock of the lathe in order to hold the workpiece. It has several screw holes through it where the screw thread passes from the back and is inserted into the wood. A faceplate can be used to support a wide variety of designs, but they have to be positioned, fixed and balanced and balanced, which aren't easy tasks if compared to the simplicity of using a tool chuck.
A typical faceplate is equipped with mounting holes. In this instance three holes are placed at 120 degrees intervals to accept the mounting screws 18 in FIGURE. 2. These screw holes are machined by an insert that can be interchanged or directly into the body of the faceplate. A portion between the faceplate has a stepped area that provides an index mark to pinpoint a specific location on the blank of the workpiece.
how to replace window locks RepairMyWindowsAndDoors stepping region is resistant to abrasion so that the fastener will not cause damage to the chisel that is used to cut into it. The surface of the faceplate body has different properties from the surrounding area. The cutting of this area warns the operator of impending contact with fasteners and gives them time to react.
Screws used to secure a faceplate in place should be of a size that fits inside the screw hole, leaving only a tiny amount of play. There shouldn't be any space left behind the screw after it is tightened on the glue block, as this could allow the block to move during turning. A heavier gauge screw will also seat more securely into the faceplate. The screw should be inserted into the middle of the screwhole to prevent the possibility that a screwhead will get into contact with the workpiece.
The Strike Plate
The strike plate is one of the most crucial components of your door lock. It is what prevents the bolt from slipping out when you shut the door. The strike plate can also help to strengthen the lock and stop intrusions by putting force against the latch and jamb.
A strike plate is a large metal plate that installs in the doorjamb (the vertical portion of the frame) with a hole for the deadbolt or latch to pass through. When the cylinder is turned, the bolt shoots out of the strike plate into the doorjamb, and it stays closed.
There are various kinds of strike plates available depending on the requirements of your. If you need a strike plate to fit to your particular lock it will be listed with the information for the product. Most strike plates are the same and can be used with standard latches and locks.
The majority of standard strike plates have an ovular screw hole and a "C-shaped" piece that functions as washer. They are usually used on doors with rounded corners. They are available in a variety sizes to match your door.
You can increase security by installing a strike plate that has no lip that is designed for deadbolts. This is a good option for areas that must be secured quickly, for instance staircases. It's also a great choice to secure equipment or documents in your home.
Another method to increase the security of your door is by installing the box strike plate which adds strength and thickness to the strike plate. This makes it more difficult to gain entry by using the latch or deadbolt. It's usually required on commercial doors that have a security lock.
Spray a lock-lubricant on the strike plate if it isn't aligned with the latch bolt. If this doesn't work, you'll need to adjust the strikeplate by drilling new screw holes and widening the catch hole. You should not make many changes to the strike plate. Repeated and extreme adjustments could cause it to become ineffective.
The Deadbolt
A deadbolt is an iron bolt that secures the door to the doorjamb frame. Unlike a spring-latch used in doorknobs which can be tied (jimmied) with credit cards or professional tools like latch slips, deadbolts are locked by keys, thumb turns or electronic (in the case of keyless and smart deadbolts). They are more secure against forced entry methods like kick-ins, and are simple to use and require little maintenance.
The bolt extends through a hole or socket inside the door jamb, which is then reinforced with a strike plate for additional security. The bolt should be a minimum of 1 inch of length to make it more difficult to remove the door. It is also recommended to select deadbolts that have an ANSI rating, which indicates how secure the lock is.
In addition to securing the bolt the strike plate holds the cylinder in place. Three holes should be drilled across the bolt. One of them connects the facepiece to the cylinder, and the two other holes are on either side of the central hole. The screws are inserted into these holes to attach the bolt and cylinder. The screws should be standard with the new deadbolt. Some locks have decorative covers that snap onto the facepieces. Consult the manufacturer's instructions to ensure that they are properly installed.
When choosing the lock for your house take into consideration your lifestyle and the level of security you need. Single deadbolts made of cylinders are the traditional lock option and are available on a wide range of exterior doors. Keyless deadbolts are more secure however they are difficult to operate. Smart deadbolts allow you to lock and unlock the bolt with voice commands or a mobile app.
A professional locksmith can help you decide which type of lock is best for your home, and install or replace it. Upgrade your front door lock to enhance the security of your home. Consider adding a double-cylinder or reversible deadbolt to the inside of your front door to provide an additional layer of security.